Javascript Menu by Deluxe-Menu.com

dhs ELMEA tools Logo  
     
VeEX Cable TV Products

   

VeEX RXT-1200

   
     

Modular Test Platform

VeEX® RXT is the industry's most flexible, compact, and futureproof hand-held test solution for core and field applications. The new and completely redesigned RXT modular platform addresses the challenges of communications service providers to increase efficiency and productivity.

Platform Highlights

  • Modern test platform, with a broad range of available test modules covering Access (copper and fiber), Metro, Transport and Core technologies
  • Application-oriented GUI
  • GUI familiarity across different test modules and other VeEX products reduces the learning curve
  • View test results and create detailed reports by region, area, system, and technician
  • Enables all jobs to be completed correctly the first time
  • The optional RXT carrier module brings forward compatibility to Sunrise Telecom's popular MTT test modules, protecting your original investment and facilitating easy transition
  • Multi-technology: DSL, Fiber Optics, DSn/PDH, SONET/SDH, OTN, Ethernet, Fibre Channel, CPRI/OBSAI,
  • Expand test functions with a growing list of test modules
  • Future-proof cost-effective platform
  • Test set connectivity via Ethernet Management interface, WiFi, Bluetooth®, or Data Card for back office applications and workflow optimization
  • User defined test profiles and thresholds
  • Fast and efficient test result transfer to USB memory stick
  • Ultra-high capacity field-exchangeable Li-ion battery pack extends testing time
 

VeEX RXT-1200
RXT-1200

PDF Datasheet PDF Datasheet

Key Features

  • Dedicated navigation buttons for non-touch screen operation (e.g. operating the test set with gloves on)
  • Rugged design with integrated dual-shot rubber for protection, extra grip, and ergonomics
  • Flexible hand and shoulder straps configurations
  • Dual hand straps for right and left-handed operations
  • Integrated adjustable rubberized kick stand
  • Integrated stylus holder
     

     

Supported Modules

   
     
100G Module

Advanced all-in-one test module for Carrier Ethernet, Backhaul & Transport technologies. The RXT-6000 module adds Ethernet, Mobile DAS, Backhaul, Storage Area Networks, OTN, SDH/SONET links and services testing, from 10 Mbps up to 100 Gbps.

Multi-service Module

Full featured test solution for OTN, SDH, SONET, PDH, DSn networks with extensive support for Mobile Backhaul technologies with SyncE, 1588v2 PTP, Carrier Ethernet, Fibre Channel and CPRI/OBSAI testing.

Cable Expert Module

Super-Tech maintenance tool for CATV, addressing RF, DOCSIS, MPEG and Ethernet applications.

SHDSL Module

Provides SHDSL 2 and 4-wire modem emulation. STU-C and STU-R functions are supported for installation and prequalification. Advanced diagnostics at the ATM and IP layers are available.

TDR/DMM Module

Provides key fault identification and location tools for the MTT-C Chassis and RXT Platform. Features include a metallic TDR and a Digital Multimeter for DC and AC Voltage, 100 MΩ Resistance, Capacitance and DC Current.

Dual/Single E1 Module

With extensive E1 transmission and signaling testing capabilities, this module is an ideal installation, maintenance and service verification tool for the 2M access network.

SDH/SONET Module

Addresses the needs for the installation of SDH/SONET as well as PDH/T-Carrier links. This module supports applications from 1.5/2 Mbps up to 2.5 Gbps (STM-16/OC-48) and ATM.

Dual Port Ethernet Module

Powerful service installation and maintenance tool for 10/100/1000 Base-T, 100Base-FX and 1000Base-SX. With wirespeed traffic generation, this module provides physical layer to IP layer testing.

  OTDR Module

Features a range of Optical test functions including OTDR, OPM, Light Source and VFL. Multi-protocol OTN, SDH/SONET, Ethernet, Fibre Channel and Synchronous Packet Networks utilizing optical fibers can easily be verified with the RXT-4100.

Dual T1 Module

From cable installation and maintenance to protocol monitoring and service verification, the Dual T1 Modules offers a full suite of tools for testing T1 circuits.

Datacom/DDS Module

Offers extensive Datacom/DDS testing capabilities for the installation and verification of WAN/data links up to 2 Mbps.

DS3/DS1 Module

With dual receivers at DS3 and dual TX/RX interfaces at DS1, the MTT-24 provides comprehensive transmission testing for both T3 and T1 circuits.

IEEE C37.94 Module

Assists technicians in turning up a new circuit or in isolating problems on both sides (teleprotection and multiplexer) of the IEEE C37.94 network.

UDSL Module

Supports VDSL2 and ADSLx and addresses some key new features including Vectored VDSL2 and Two Line Bonding.

SHDSL.bis Module

Combines standard ITU-T G.991.2 and enhanced SHDSL.bis data rates, supported for one to four copper pairs.

OSA Module

Optical Spectrum/Channel Analyzer for CWDM and DWDM networks. Using micro-optic design and MEMS tuning technology, the OSA module measures key optical parameters such as wavelength, channel power, and OSNR.

     

   
VeEX VePAL CX350    
     


VeEX VePAL CX350

PDF Datasheet Brief brochure

Platform Highlights
  • Robust, light weight chassis packed with powerful features for demanding test environments
  • Linux operating system for stable and consistent platform performance
  • Fast system power up time in less than 20 seconds
  • Intuitive presentation of measurements in tabular and graphic formats
  • High resolution color 7” touch-screen LCD
  • Optimized for field engineers or technicians installing and maintaining CATV networks
  • Ethernet interface for back office applications, remote control, and workforce management
  • USB memory stick and FTP upload support for test result storage / file transfer
  • ReVeal PC CX software to maintain instrument software, manage location profiles, channel tables and measurement
    thresholds, process measurement results and generate customer test reports
  • Extended field testing time > 6 hours operating time using interchangeable LiIon battery pack/s.
  • Ability to lock User interface to prevent unwanted human interference during long term testing
  • Web based remote control via 10/100-T Ethernet connection
  • Triple Play Test Applications to provision VoIP, IPTV and High speed Internet access via Ethernet or RF DOCSIS port
 

CATV Network Testing Simplified
VeEX VePal CX350 is a portable, fully integrated
test solution for legacy Analog and Digital Cable TV
networks supporting the next generation DOCSIS/Euro DOCSIS 3.0 cable modem.

Key Features

  • Frequency range from 5MHz to 1GHz
  • Annex A, B and C signal format support
  • Video and audio power level measurements
  • Advanced single-channel SLM measurements with Min/Max thresholds
  • Fast system scan of the active channel plan
  • Tilt measurements for distortion versus frequency
  • Built-in dual band DOCSIS/Euro DOCISIS3.0 Cable Modem with Baseline Privacy Interface (BPI+) certificate support
  • Home Installation Procedure (HIP) with user defined location and measurement specific test limits
  • Forward and Return path ingress scan to capture impulse noise and interferers
  • Forward and return path QAM signal analysis including deep interleaved modulation support, Pre/Post BER, Constellation
    diagram, and Equalized / non Equalized MER
  • Advanced digital measurement supports Hum, EVM, Phase Jitter, Group Delay, and Frequency response measurements and
    displays of equalizer taps
  • 10/100/1000-T Ethernet port for Cable Modem emulation or can be used as an Ethernet tester for BERT, Throughput and
    RFC2544 measurements
  • USG Generator generates QAM16/64/128, CW, and QPSK signals
  • TDR supports up to 2Km/6K feet of standard co-axial cable
more VeEX products...
     

   
VeEX VePAL CX380    
     

CATV Network Testing Simplified
VeEX VePal CX380 is a next generation test solution designed for analog and digital cable TV networks with enhanced spectrum, digital channel, and forward & return path sweep analysis

Platform Highlights

  • Robust, light weight chassis packed with powerful features for demanding test environments
  • Linux operating system providing stability and enabling consistent platform performance
  • Intuitive presentation of measurements with tables and graphics
  • High resolution color 7” touch-screen viewable in any lighting conditions
  • Optimized for field engineers or technicians installing and maintaining CATV networks
  • Ethernet connection for remote control, back office applications, and workforce management
  • USB memory stick and FTP upload support for test result storage / file transfer
  • Maintain instrument software, manage test setups and channel tables, process measurement results and generate
    customer test reports using included ReVeal PC software
  • Extend field testing time using interchangeable LiIon battery pack/s. Greater battery autonomy provided in standby mode
  • Ability to lock User interface to prevent unwanted human interference during long term testing
  • Support Triple Play Test Applications such as VoIP, IPTV and High speed Internet access via Ethernet management port or
    RF DOCSIS test port

Key Features

  • Frequency range from 5MHz to 1GHz
  • Support Annex A, B and C signal formats
 


VeEX VePAL CX380

PDF Datasheet Brief brochure

  • Measure video and audio channel power level of NTSC, PAL and SECAM analog video signals
  • Built-in DOCSIS 2.0 Cable Modem with Baseline Privacy Interface (BPI+) certificates installed
  • Fast system scan of the entire active channel plan
  • Installation test procedure with user defined location specific limits
  • Single-channel measurements with Min/Max thresholds
  • Tilt measurements to indicate distortion over the frequency spectrum allowing technicians to apply correct equalization
  • Spectrum analysis with 10uS dwell time to capture fast transient and impulse noise
  • Measurement of forward and return path QAM digital signals including deep interleaved modulation, MER, Pre/Post BER, Constellation diagram, and equalizer on/off mode
  • Optional advance channel measurements including CTB, CSO, Hum, EVM, Phase Jitter, Group Delay, Frequency response
  • Optional USG Generator generates QAM16/64/128, CW, and QPSK signals
  • Optional Sweep tone generator from 5MHz to 1GHz

more VeEX products...
     

     
VeEX CX-Series Compariosn Chart    
     
VeEX CX-Series Compariosn Chart
     

   
VeEX VePAL CX180+ (DOCSIS 2.0) / CX180-D3+ (DOCSIS 3.0)
     
VeEX VePAL CX180+ (DOCSIS 2.0 ) / CX180-D3+ (DOCSIS 3.0)
VePAL CX180+ (DOCSIS 2.0) /
CX180-D3+ (DOCSIS 3.0)

PDF Datasheet Brief brochure

 

An all-in-one, super-tech installation and maintenance tool for next generation CATV networks. It can be used at the headend for return path ingress scan and return path QAM analysis. Enhanced ingress monitoring in both the forward and reverse paths is possible across a 50dB dynamic range. Adjustable Resolution Bandwidths, measurement dwell times and attenuation provide spectrum analysis capabilities all optimized for CATV signal types and bandwidth. Similar to the CX150+ / CX150-D3+, a DOCSIS 2.0 / DOCSIS 3.0 Cable Modem or an advanced USG are available as hardware options at time of order or as field upgrades. Remove View software option is also available on CX180+ / CX180-D3+.

more VeEX products...
     

   
VeEX VePAL CX150+ (DOCSIS 2.0) / CX150-D3+ (DOCSIS 3.0)
     

VeEX VePAL CX150+ (DOCSIS 2.0 ) / CX150-D3+ (DOCSIS 3.0)
VePAL CX150+ (DOCSIS 2.0) /
CX150-D3+ (DOCSIS 3.0)

PDF Datasheet Brief brochure

  Equipped with the same base feature set as the CX100, the CX150+ or the CX150-D3+ is fitted with a built-in DOCSIS 2.0 or a DOCSIS 3.0 compliant Cable Modem that is capable of linking up with a Cable Modem Termination System (CMTS). The DOCSIS 3.0 Cable Modem is bonding 8 Channels (contiguous an non-contiguous) in downstream and 4 Channels in upstream. Cable modem emulation provides valuable statistics pertaining to the upstream and downstream paths and related servers for video, internet and VoIP traffic, Triple Play Services can be verified on either the RF and/or LAN interfaces while the unique pass-through mode provides true modem emulation and Ethernet traffic statistics. The Remote View option allows viewing of the return path monitoring results from a CX180R headend system.
more VeEX products...
     

   
VeEX VePAL CX120+    
     

Equipped with the same base feature set as the CX100, the CX120+ boasts the industry's first Upstream Signal Generator with FEC capabilities as an option. This unique feature is used to characterize the HFC return path for CW, QPSK, QAM16, QAM64, or QAM128 transmission while QAM analysis is made possible when the unit is used in conjunction with the CX180 handheld or CX180 head end monitoring solutions. The TDR option pin-points Opens, Shorts and other impedance abnormalities quickly. Equipped with the Remote View option, the CX120+ is able to remotely retrieve on demand return path QAM test results performed at the headend by the CX180R system.

 

VeEX VePAL CX120
VeEX VePAL CX120+

PDF Datasheet Brief brochure


more VeEX products...
     

   

VeEX VePAL CX100+

     

VeEX VePAL CX100
VeEX VePAL CX100+

PDF Datasheet Brief brochure

 

A next generation CATV installer meter to characterize and measure Analog and Digital video signals. For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately with MER, BER and Constellation diagram results being reported. Tilt, Quick Test, and Forward/Reverse ingress scan are standard features. The built-in Ethernet port supports Triple Play test features, such as, VoIP Call emulation with MOS scoring, Web-browser, IP connection testing, remote control, test results upload/download, and system management. WiFi connectivity tests can be performed using a USB WiFi adaptor.

more VeEX products...
     

   
VeEX VePAL CX40    
     
This palm size, light weight TDR is an ideal tool for co-axial and twisted pair cable fault location. The One-touch Automatic Fault Locating (AFL) feature quickly identifies cable faults within a distance range of 4,000 meters or 12,000 feet, while the graphic display simplifies viewing of detected impairments. Velocity of Propagation (Vp), attenuation and cable range can be easily programmed via the unit's user friendly interface. Four Alkaline batteries provide up to 30 hours of continuous autonomy and an auto power off mode extends the battery life for months of normal daily usage. A transflective LCD with backlight enables operation under any lighting conditions.  

VeEX VePAL CX40
VeEX VePAL CX40

PDF Datasheet Brief brochure

more VeEX products...
     

   

VeEX CX180R-IGM

     

This rack mount headend system completes the requirement of DOCSIS 3.0 deployment where higher QAM on the return path becomes necessary and mandatory. The compact 1U rack mount chassis supports simultaneous and continuous ingress scanning of all 10 ports at a fast sweep rate of 200ms and dual ports are available for return path spectrum, QAM, MER, BER, and Constellation analysis. The unique system architecture is an affordable entry solution which can be scaled easily for future network expansions. The system is completed by a controller software package offering 3D graphics for detailed analysis of ingress, alarm detection/generation and trouble ticket management. A server option coupled to the system is capable of storing 30 days of ingress monitoring data for reference.

 

VeEX CX180R-IGM
CX180R-IGM

PDF Datasheet Brief brochure

more VeEX products...
     

   
VeEX CX180F    
     

VeEX CX180F
CX180F

PDF Datasheet Brief brochure

 

The CX180F is a rack mount monitoring system to check the performance of analog and digital channels being transmitted downstream or towards customers across a CATV HFC network. Equipped with three test ports, key signal parameters including level, BER, MER, and Constellation are scanned continuously and non-intrusively. Advanced spectrum analysis across the entire operating frequency band, detects ingress which can lead to signal impairment and/or failure. The ReVeal CX180F controller/server package which forms an integral part of the system, continuously checks for signal values that exceed user defined thresholds. Out of tolerance parameters trigger alarms which inform and alert the headend operator of problematic links and service.

     

   
VeEX CX20    
     


The CX20 Leakage Detector is an affordable accessory and leakage solution for field technicians already equipped with a CX series CATV tester. The unit features a calibrated antenna and sensitive leakage receiver with sophisticated signal processing to discriminate between leaks and noise. A USB communication connection to the CX tester displays the measurement results and also provides power to the leakage detector. Test results can be saved and exported via ReVeal software or uploaded automatically via DOCSIS or 3G/UMTS RF connection.

  • Robust, handheld construction for demanding field test applications and conditions
  • Designed for technicians troubleshooting and identifying leakage at subscriber premises
  • Compatible with all VeEX V100+ and V300 products (CX series)
  • USB power supplied by USB port on companion test set
  • Measurement results displayed and stored on companion test set
  • Leakage measurements can be exported via USB memory stick, FTP upload (LAN , DOCSIS, or 3G/UMTS) or using ReVeal CX software
  • Weighs less than 500grams
  • ROHS compliant

Key Features

  • FCC and EU leakage conformance
  • High performance, frequency agile detection
 
  • Preset 10 carrier frequencies in non-volatile memory
  • High band: 120 to 155 MHz with 500Hz resolution
  • Low band: 109 to 110 MHz with 500Hz resolution
  • Digital Tags and detection
  • Calibrated Level Range: 10 to 5000μV/m
  • Carrier Level measurement (peak and average)
  • 1st Harmonic level measurement (PAL or NTSC)
  • Leakage detected within sensitivity range displayed on companion VeEX CX series test set
  • Advanced signal design processing discriminates between leaks and noise
  • Automatic Composite Triple Beat (CTB) gain correction
  • Peak hold measurement to capture maximum levels

VeEx CX20
CX20

PDF Datasheet Brief brochure

     

 
more VeEX products...

   
 
       
 © dhs ELMEA tools GmbH
 fon +49 6074 / 91 99 08 - 0  l  fax +49 6074 / 91 96 747  l  e-mail info@dhs-tools.de